| Application:Batteries, and other transparent products with a frame filling.

|Principle of operation：

1, the program editor: in-kind editing, and then Chen can be
2, the program calls: the program has been edited, similar products can be transferred out.
3, the working principle: the machine head movement, power to do power for the plastic.
4, the movement trajectory: straight. Vertical line. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, glue machine automatic ratio

| Parameters:

1	Proportion with glue	3: 1~1:1 adjustable between 1 and any fixed proportion
2	Mixing method	Dynamic mixing
3	Machine travel	1200*800*100mm
4	Programming mode	Teaching programming680*680mm
5	The main pump (A pump)	9cc/turn
6	Attached pump (B pump)	2.4cc/turn
7	Glue power	Bujin motor
8	Dimensions	1800*1050*1500mm
9	Tank Capacity	A barrel 50L with constant device, B barrels 15L
10	A plastic head	Single
11	Input pressure	0.5-0.7Mpa
12	Machine power	1200W
13	Supply voltage	AC220V±10%,50HZ

| Device Configuration:

1	Control System	Xinjie PLC + single +7.2 inch touch screen
2	Software system	R&D independently，Chinese
3	Material metering	YAKOR&D independently
4	Cut off the system	ZhonghuR&D independently
5	Mixing device	ZhonghuR&D independently
6	Cleaning system	Gas and liquid cleaning
7	Frame material	Steel structure
8	Sliding device	A3*3mmR&D independently

| Features:

1, By machine ----- SCM control, enter the number can be.
By manual ----- by means of weighing tools, the container residue waste.
2, By machine----- how much to lose the number of numbers, that is, take the use, there is no intermediate links.
By manual ------ must be a certain amount of the contents of a container, the container wall will stick a lot due to the characteristics of the raw material itself, in a certain period of time will not be finished all scrapped.
3, By machine ----- easy to maintain the working environment.
By manual ----- working environment is not easy to maintain, special materials are everywhere, and not clean.
4, By machine------ mechanical parameters set up, to ensure the consistency of raw materials ratio.
By manual ------ weighing tools and man-made operation there are many uncertainties, will be consistent with the product.

| Applicability:

With the development of society, labor shortage, competition between enterprises, enterprises to promote automated production, automatic quantitative Dijiao machine is a good helper. Can help enterprises solve the following problems:
1. Mixing ratio: completely rely on manual operation, easy to proportional deviation, stirring uneven
2. Production operations: manual operation is difficult to control the amount of plastic products, the thickness of a single product surface coating inconsistent.
3. Product quality: the production process can not control factors, the quality of each batch of product ups and downs, consistency is poor, to solve the product watermark, flatness.
4. Production costs: labor expensive, slow, and bad management. Automatic quantitative Dijiao machine for enterprises to reduce costs, improve quality, improve production and enhance competitiveness to create the conditions.