|Principle of operation：

1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4. Movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory.
5, Z axis up and down movement with ball shaft screw rapid response.
6, choose the kind of glue, as long as the choice of control card like.

| Application product（in 2M）
1, light bar categories: small modules, soft light, hard light, and so on
2, lighting categories: small modules, wall washer, spot lights, line lights and so on
3, electronic categories: waterproof power, transformers, circuit boards and so on
4, all kinds of non-standard type of irrigation

| Parameters:

A.10:1 to 4:1 glue configuration.

1	Proportion with glue	10:1 to 4:1 epoxy resin
2	Mixing method	Dynamic mixing
3	Machine travel	2000*400*100mm
4	Programming mode	Teaching programming
5	Application product	Light bar, lamp, module in2M
6	Dimensions	(L) 2400*(W)1050*(H)1480mm
7	The main pump (A pump)	9CC/Gear pump(Taiwan Shuohong)
8	Attached pump (B pump)	2.4CC/Gear pump(Taiwan Shuohong)
9	Tank Capacity	A Cylinder25L，B Cylinder25L with thermostat
10	A plastic flow	2-15g/s
11	A plastic head	Standard single head，Number of head according to the product
12	Input pressure	0.5-0.7Mpa
13	Machine power	20000W
14	Supply voltage	AC220V±10%,50HZ

B.4:1 PU glue configuration.

1	Proportion with glue	3:1 to 1:1 PU glue
2	Mixing method	Dynamic mixing
3	Machine travel	2000*500*100mm
4	Programming mode	Teaching programming
5	Application product	Light bar, lamp, module in 2m
6	Dimensions	2400*1050*1480mm
7	（A pump）	3.2CC/Gear pump(Taiwan Shuohong)
8	（B pump）	3.2CC/Gear pump(Taiwan Shuohong)
9	Tank Capacity	A Cylinder25L，B Cylinder25L with thermostat
10	A plastic flow	2-15g/s
11	A plastic head	Standard single head，Number of head according to the product
12	Input pressure	0.5-0.7Mpa
13	Machine power	2000W
14	Supply voltage	AC220V±10%,50HZ

| Device Configuration:

1	Control System	Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen
2	Software system	Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function
3	Operatemotor	YAKOOriginal motor
4	Metering pump body	Precision adjustment wear type
5	Cut off the system	ZhonghuR&D independently
6	Mixing device	ZhonghuR&D independently
7	Stirring motor	OUTAI
8	Frame material	A3*3mm manufacture
9	Sliding device	TaiwanHIWIN
10	Mixing tube cleaning	ZhonghuR&D independently

| Features:

1	Friendly and concise interface	Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes
2	High-end imported electronic control system	The main electrical part of the wiring, dust, anti-static, have reached foreign standards Relay Omron. Using the Xinjie PLC All motors are overload protected. Using high-precision motion control system
3	Glue detection feedback function	The drum part is equipped with low level alarm function, timely reminds the glue
4	Glue filter four protection	Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline
5	Large work surface	Can be placed at the same time a number of products, the machine automatically continuous operation, with more efficient
6	Equipment running more smoothly	The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy
7	High precision mechanical pump body	Precision adjustment wear type
8	Automatic mechanical agitation	AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable
9	High precision operation	Using HIWIN linear slide and high-precision balance block to ensure the accuracy of operations
10	Glue bucket heating	The use of imported high-quality safety factor reliable silicone film fever, super protection

| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.

| Characteristics ofglue-mixing part：

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5. Easy to clean, A B plastic mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts are not cleaned, if the get off work or to stop for some time to only need to press the automatic cleaning button

|Technicalcharacteristics ofthe machine :

1, the proportion of any adjustable glue: not limited to the use of the ratio of 1: 1 of the glue, for this technical bottleneck we first break.
2, choose any glue supplier: because the machine has a smart matching glue function, not limited to 1: 1 glue.
3, for enterprises to save costs: a machine can replace multiple employees, a year can save the money out of the machine.
4, for enterprises to reduce the burden of management and recruitment. Reduce the burden on employees, administrators, management can focus more on the management of production; personnel recruitment staff also eliminates the "difficult" problem, a lot of hidden costs to reduce.
5, the company has a number of experienced design (10 years of plastic irrigation design and development experience) for the future maintenance of the machine, upgrade escort. In the production process can also give some suggestions.

6, the company product positioning clear. And the market of other companies with the same type of strategy is different, I Secretary adhering to the "all for the customer, for all customers, for all customers," the spirit of Seiko fine carving, high quality products, higher positioning market, relying on customer reputation based on the market. Do not seek short-term interests.